MultiFiber™ Pro Optical Power Meter and Fiber Test Kit
Specifikace
| Environmental | |
| Operating temperature | -10ºC to +50ºC |
| Storage temperature | -20ºC to +50ºC |
| Operating humidity | 95% (10ºC to +35ºC) non-condensing |
| 75% (35ºC to +45ºC) non-condensing | |
| Uncontrolled <10ºC | |
| Operating altitude | 4,000 m |
| Storage altitude | 12,000 m |
| Vibration | Random 2 G, 5 Hz to 500 Hz |
| Optical Power Meter (Specifications apply at 23ºC (73ºF), unless otherwise noted.) | |
| Detector type | InGaAs |
| Calibrated wavelengths | 850 nm, 1300 nm, 1310 nm, 1550 nm |
| Measurement range | 0 dBm to -50 dBm |
| Test time | 6 seconds |
| Power measurement linearity | ±0.1 dB2 |
| Power measurement uncertainty | ±0.35 dB2 |
| Power measurement repeatability | < 0.10 dB2 |
| Display resolution, dB or dBm | 0.01 |
| Power display units | dBm, mW, µW |
| User-selectable limit for loss | 0.05 dB to 50.0 dB, in increments of 0.05 dB up to 10.0 dB and 0.1 dB up to 50.0dB |
| Auto wavelength detection | Yes |
| Polarity detection | Detects A, B, C, and Corning Plug & Play™ Universal Systems polarities |
| 2 kHz detection | Yes |
| Record storage | 3000 records, one fiber per record (250 12-fiber cables) |
| External interface | USB 2.0, full speed |
| Optical connector | MPO interface for 12-fiber, unpinned plugs. Compatible with 62.5 µm, 50 µm, and singlemode fibers. Connector has a self-closing, protective cover. |
| Power requirement | 2 AA alkaline batteries |
| Battery life3 | 30 hours (typical) |
| Automatic power-off | 10, 20, 30, or 60 minutes (can be disabled by the user) |
| Low battery warning | Low battery icon blinks |
| Size | 5.8 in x 3.2 in x 1.6 in (14.7 cm x 8.0 cm x 4.0 cm) |
| Weight | 10.9 oz (309 g) |
| 850 nm Source | 1310 nm Source | 1550 nm Source | |
| Emitter type | LED | Laser | |
| Wavelength | ±30 nm | 1310 nm ±20 nm | 1550 nm ±20 nm |
| Spectral width (FWHM) | 50 nm (typical) | 2 nm typical, 5 nm maximum | |
| Minimum output power | ≥ -24 dBm | ≥ -1 dBm | |
| Power output stability | ≤±0.1 dB over 8 hours4 | ±0.25 dB over 8 hours5 | |
| Laser safety | IEC 60825-1:Class 1 | ||
| Encircled flux | Meets TIA 455-526-14B, ISO/IEC 14763-3, and IEC 61280-4-1 for 50/125 µm at the source’s optical connector. | NA | |
| Optical connector | MTP/MPO interface for 12-fiber, unpinned plugs. Compatible with 62.5 µm and 50 µm fibers, non-APC only. Connector has a self-closing, protective cover. | MTP/MPO interface for 12-fiber, unpinned plugs. Compatible with 9 µm fibers, APC only. Connector has a self-closing, protective cover. | |
4. 23°C, after 10 minutes of warm-up time. 5. 23°C, after 15 minutes of warm-up time |
|||
| Modes | 2 kHz modulated, auto wavelength/td> | ||
| Power requirement | 2 AA alkaline batteries | ||
| Battery life6 | >30 hours (typical) | ||
| Automatic power-off | 10, 20, 30, or 60 minutes (can be disabled by the user) | ||
| Low battery warning | Low battery icon blinks | ||
| Size | 5.8 in x 3.2 in x 1.6 in (14.7 cm x 8.0 cm x 4.0 cm) | ||
| Weight | 11.4 oz (323 g) | ||
- For 850 nm, 0 dBm to -50 dBm. For 1300, 1310, 1550 nm, -5 to -50 dBm
- Measured power levels ≤0 dBm. Backlight on. Battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries
- 23°C ±2°C, after 10 minutes of warm-up time
- Auto wavelength,SCAN ALL, and backlight on. Battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries
« Vlastnosti | Specifikace | Modely, volby a doplňky »